Funique Composites Private Limited

A carbon fiber sheet is a flat panel made from carbon fiber-reinforced polymer. These sheets are widely used in industries like aerospace, automotive, marine, robotics, and sports due to their exceptional strength-to-weight ratio, stiffness, and corrosion resistance.

Key Characteristics:

• Material: Woven carbon fiber fabric (often 3K weave) infused with a resin (typically epoxy).

• Strength & Stiffness: Stronger and stiffer than steel by weight.

• Weight: Very lightweight.

• Appearance: Sleek, often with a glossy or matte finish showcasing the weave pattern.

• Thickness: Ranges from 0.2mm to over 10mm.

• Form Factors: Available in plain weave, twill weave, or unidirectional patterns.

Common Uses:

• Automotive: Interior trim, body panels, spoilers.

• Aerospace: Structural panels, fairings.

• RC & Drones: Frames, arms.

• DIY & Maker Projects: Robotics, brackets, structural parts.

• Sporting Goods: Skis, snowboards, bicycles.

Types:

• Prepreg Sheets: Pre-impregnated with resin and cured under heat and pressure for superior strength.

• Wet Layup Sheets: Resin applied during fabrication, usually cheaper but less consistent in strength.

• Quasi-isotropic Sheets: Fiber orientations optimized for strength in multiple directions.

Buying Tips:

• Check fiber type (e.g., T300, T700).

• Verify cure method (autoclave-cured sheets are premium).

• Look for flatness tolerance if precision is important.

• Choose thickness and weave based on your project's mechanical and aesthetic needs.

 

Would you like recommendations for where to buy it or help choosing the right one for a specific application?

We have Provided and manufacture Carbon Fiber Canopy and And other all carbon products. like Carbon fiber Sheets, Carbon fiber strip, Carbon fiber medical table, Carbon fiber canopy, carbon fiber landing gear, Carbon fiber tubes, Carbon fiber wings ETC...
We are all types carbon products coustomised size as per coustomer requirements

Excellent — carbon fiber is actually a top-tier choice for robotic parts thanks to its lightweight + stiffness + fatigue resistance combo. For a robot part manufacturer, here’s exactly how you’d want to think about using carbon fiber:

Why Carbon Fiber is Ideal for Robot Parts

• Lightweight ➔ Reduces motor loads, increases speed & efficiency

• High Stiffness ➔ Minimizes flex/bending (critical for precise robotic arms)

• Fatigue Resistance ➔ Handles repeated motion cycles

• Vibration Damping ➔ Helps in pick-and-place robots, CNC arms, vision systems

• Corrosion Resistant ➔ Works in industrial and even harsh chemical environments

Recommended Carbon Fiber Types for Robotics Common Robot Parts Made from Carbon Fiber

• Robot Arm Tubes ➔ Replaces aluminum to cut weight by ~40%

• End Effectors (grippers, tools) ➔ Light and fast-moving

• Frames & Gantry Beams ➔ Stiff, stable platforms

• Linear Guides & Rails ➔ Reduces mass while keeping rigidity

• Camera / Sensor Mounts ➔ Reduces vibration impact on vision systems

Recommended Carbon Fiber Forms Surface Finish Tips

• Matte Finish ➔ For industrial robots (reduces glare in vision systems)

• Glossy Finish ➔ For display robots or premium consumer devices

Top Suppliers for Robotic-Grade Carbon Fiber

• Rock West Composites

• DragonPlate (specifically makes robot arm tubes)

• Exel Composites

• Toray / Teijin (for OEM large-scale manufacturing)

Pro Tip for Robot Manufacturers

• Switch from aluminum tubes to roll-wrapped carbon fiber tubes ➔ You cut robot arm weight by ~40%, which allows using smaller, cheaper motors and results in faster motion with less energy use.

• For high-precision robots, consider intermediate modulus (IM7) for the best mix of stiffness and fatigue life.

Would you also like me to provide you with a sample material spec sheet or a recommended BOM (Bill of Materials) for a robot arm made using carbon fiber?
Just say yes — I can tailor it for either industrial robots or lightweight collaborative robots (cobots)!

The Quality of this carbon fiber sheet is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 
Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

Carbon fiber landing gear is commonly used in RC planes, drones, and even experimental aircraft due to its lightweight, high strength, and fatigue resistance.

Key Benefits of Carbon Fiber Landing Gear:

• Lightweight: Reduces overall aircraft weight, improving efficiency.
• High Strength & Rigidity: Can withstand high impact forces.
• Fatigue & Corrosion Resistance: Unlike metal, it doesn’t corrode or weaken over time.
• Flexibility in Design: Can be shaped for different aircraft types.

Specifications for Your Mentioned Size:

• Dimensions: 36x99x345 mm
• Thickness: 4mm
• Material: Carbon Fiber (likely prepreg or laminated sheets)
• Applications: RC aircraft, UAVs, small experimental planes

 

Carbon fiber landing gear is commonly used in RC planes, drones, and even experimental aircraft due to its lightweight, high strength, and fatigue resistance.

Key Benefits of Carbon Fiber Landing Gear:

• Lightweight: Reduces overall aircraft weight, improving efficiency.
• High Strength & Rigidity: Can withstand high impact forces.
• Fatigue & Corrosion Resistance: Unlike metal, it doesn’t corrode or weaken over time.
• Flexibility in Design: Can be shaped for different aircraft types.

Specifications for Your Mentioned Size:

• Dimensions: 36x99x345 mm
• Thickness: 4mm
• Material: Carbon Fiber (likely prepreg or laminated sheets)
• Applications: RC aircraft, UAVs, small experimental planes

 

We have Provided and manufacture Carbon Fiber shoes and The boot or shoe is close-fitting. The inside padding is made of leather, Professional inline speed made from carbon fiber material .

The Quality of this carbon fiber Agricultural Drone is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.
We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 

Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

This product is a Carbon Fiber + Honeycomb Composite Racket manufactured by Funique Composites Pvt. Ltd.

Key Features:

1. Outer Surface:

• The top layer is made of carbon fiber fabric with a visible weave pattern.

• Carbon fiber provides high strength, stiffness, and durability.

• It also gives a premium and professional finish.

2. Core Structure:

• The inner core consists of a honeycomb structure.

• The honeycomb core increases structural rigidity while keeping the overall weight extremely low.

• This combination offers an excellent strength-to-weight ratio.

Advantages:

• Lightweight

• High mechanical strength

• Excellent stiffness

• Impact resistance

• Corrosion resistance

Applications:

This type of composite panel is commonly used in:

• Aerospace components

• Automotive body parts

• Sports equipment

• Industrial structural panels

• Robotics and lightweight enclosures

Overall, this is a high-performance lightweight composite material designed for applications where both strength and weight reduction are critical.

 

The Chopped Carbon Fiber Helmet is a high-performance protective component manufactured using advanced carbon fiber reinforced composite technology. In this design, short strands of carbon fiber are randomly distributed and bonded with high-strength resin to form a durable composite structure. This method provides excellent strength, lightweight performance, and allows complex shapes to be molded easily.

Product Description:
The Chopped Carbon Fiber Helmet, customized by Funique Composites Pvt Ltd, is engineered for applications where high strength, low weight, and durability are essential. The helmet shell is fabricated using chopped carbon fiber strands combined with polymer resin and molded under controlled conditions to achieve a rigid and impact-resistant structure. Carbon fiber composites are known for their exceptional strength-to-weight ratio, corrosion resistance, and long service life, making them suitable for demanding engineering and protective applications.

The chopped fiber structure distributes fibers in multiple directions, which improves structural stability and provides balanced mechanical properties throughout the component. This technology also enables the production of complex and customized shapes while maintaining high performance.

Key Features:

• Lightweight yet high-strength carbon fiber composite structure

• Excellent impact resistance and durability

• Multi-directional fiber orientation for improved structural stability

• Corrosion and wear resistant surface

• Custom design and manufacturing by Funique Composites Pvt Ltd

• Suitable for specialized industrial or technical applications

Material: Chopped Carbon Fiber Helmed 
Manufacturer: Funique Composites Pvt Ltd
Type: Customized Composite Helmet / Protective Shell

The Quality of this carbon fiber sheet is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.
We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 

Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

Low-temperature sealant tape is designed to maintain its adhesive and sealing properties in cold environments, making it ideal for applications in refrigeration, HVAC systems, cold storage, and outdoor installations during winter.

Key Features

• Cold-Weather Performance – Stays flexible and adheres well even at low temperatures (often as low as -40°F/-40°C).
• Water & Moisture Resistance – Provides a reliable seal against leaks in cold and humid conditions.
• Strong Adhesion – Bonds well to metal, plastic, glass, and other surfaces.
• UV and Chemical Resistance – Suitable for outdoor exposure and industrial use.
• Easy Application – Often comes as a peel-and-stick tape for quick installation.

Common Uses

• Sealing HVAC ducts and pipes in freezing conditions.
• Repairing cold storage insulation and freezer doors.
• Waterproofing outdoor cables and joints.
• Securing and sealing roofing materials in winter.

Would you like recommendations for specific brands or applications?

Manufactured using high-strength carbon fiber materials, the components provide:

• Lightweight performance
• Excellent mechanical strength
• Corrosion resistance
• Smooth surface finishing
• Long-term durability and stability

The ergonomic and precision-engineered design makes these parts ideal for medical instruments, orthopedic systems, and customized composite assemblies requiring strength with reduced weight.

These components are produced through advanced composite manufacturing techniques such as carbon fiber layup, vacuum curing, CNC machining, and precision finishing.

 

White Plan