Funique Composites Private Limited

The Quality of this carbon fiber sheet is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.
We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 

Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

This is a lightweight release fabric used in composite manufacturing.

• Material: Nylon/Polyester (commonly used for peel ply)

• GSM: 85 (lightweight, thin fabric)

• Width: 1000 mm (≈ 39.4 inches)

Common Applications:

• Applied over wet composite laminates

• Creates a textured surface for secondary bonding

• Protects laminate surfaces during curing

• Eliminates the need for sanding before bonding or painting

Key Features:

• Easy to peel off after resin curing

• Provides a clean, consistent surface finish

• Prevents contamination of the composite surface

• Heat resistant and chemically compatible with common resins

 

It looks like you're referring to a breather fiber fabric with a 130 GSM (grams per square meter) weight and a width of 1500 mm (1.5 meters).

This type of fabric is often used in vacuum bagging, composites manufacturing, and resin infusion processes. It allows air and excess resin to escape while providing uniform pressure distribution during curing.

Would you like help finding a supplier, technical specifications, or alternatives?

A vacuum bagging kit is used in composite manufacturing to apply uniform pressure while laminating materials like carbon fiber, fiberglass, or Kevlar. It helps remove excess resin, reduce voids, and improve the strength and finish of the final product.

Typical Components of a Vacuum Bagging Kit:

1. Vacuum Bag Film – A flexible, airtight sheet that covers the laminate.
2. Breather Cloth – A porous material that allows air to escape and distributes pressure evenly.
3. Peel Ply – A release fabric that prevents resin buildup and provides a textured surface for secondary bonding.
4. Release Film – A non-stick layer to prevent adhesion to the bag or other materials.
5. Sealant Tape – A sticky tape that creates an airtight seal around the vacuum bag.
6. Vacuum Pump – The main tool that removes air from the bag, creating negative pressure.
7. Vacuum Hose & Fittings – Tubes and connectors that link the bag to the pump.

Applications:

• Aerospace
• Automotive (carbon fiber parts)
• Boatbuilding
• Custom composite manufacturing