Funique Composites Private Limited

A carbon fiber sheet is a lightweight, strong, and durable material made from layers of carbon fiber fabric that are bonded together with resin (usually epoxy). These sheets are commonly used in aerospace, automotive, sports equipment, robotics, and industrial applications due to their high strength-to-weight ratio, corrosion resistance, and aesthetic appeal.

Types of Carbon Fiber Sheets

1. Plain Weave – A balanced, tight weave with uniform strength.
2. Twill Weave – More flexible and visually appealing with a diagonal pattern.
3. Unidirectional – Strength is concentrated in one direction, ideal for structural applications.
4. Forged Carbon Fiber – Made from chopped carbon fiber, offering a unique look and excellent durability.

Key Benefits

• Ultra-Lightweight – Significantly lighter than metals like aluminum or steel.
• High Strength & Stiffness – Stronger than steel at a fraction of the weight.
• Corrosion & Chemical Resistance – Ideal for harsh environments.
• Aesthetic Appeal – Often used for luxury and high-performance applications.
• Customizable – Can be cut, layered, and molded to fit specific needs.

Common Applications

• Automotive – Used in race cars, supercars, and aftermarket parts.
• Aerospace – Aircraft components, drones, and satellites.
• Sports & Recreation – Bicycle frames, golf clubs, and fishing rods.
• Industrial & Robotics – Machine components and robotic arms.
• Medical Devices – Prosthetics and orthopedic supports.

Do you need recommendations on where to buy, how to cut, or specific applications?

A carbon fiber sheet is a lightweight, strong, and durable material made from layers of carbon fiber fabric that are bonded together with resin (usually epoxy). These sheets are commonly used in aerospace, automotive, sports equipment, robotics, and industrial applications due to their high strength-to-weight ratio, corrosion resistance, and aesthetic appeal.

Types of Carbon Fiber Sheets

1. Plain Weave – A balanced, tight weave with uniform strength.
2. Twill Weave – More flexible and visually appealing with a diagonal pattern.
3. Unidirectional – Strength is concentrated in one direction, ideal for structural applications.
4. Forged Carbon Fiber – Made from chopped carbon fiber, offering a unique look and excellent durability.

Key Benefits

• Ultra-Lightweight – Significantly lighter than metals like aluminum or steel.
• High Strength & Stiffness – Stronger than steel at a fraction of the weight.
• Corrosion & Chemical Resistance – Ideal for harsh environments.
• Aesthetic Appeal – Often used for luxury and high-performance applications.
• Customizable – Can be cut, layered, and molded to fit specific needs.

Common Applications

• Automotive – Used in race cars, supercars, and aftermarket parts.
• Aerospace – Aircraft components, drones, and satellites.
• Sports & Recreation – Bicycle frames, golf clubs, and fishing rods.
• Industrial & Robotics – Machine components and robotic arms.
• Medical Devices – Prosthetics and orthopedic supports.

Do you need recommendations on where to buy, how to cut, or specific applications?

The Quality of this carbon fiber sheet is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.
We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 

Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

The Quality of this carbon fiber sheet is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.
We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 

Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

The Quality of this carbon fiber sheet is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.
We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 

Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

·Carbon Fabric 1K BD Plain 90 GSM ·Carbon Fabric 3k BD Plain 160 GSM ·Carbon Fabric 3k BD Plain 200 GSM ·Carbon Fabric 3k BD Twill 200 GSM ·Carbon Fabric 3k BD Twill 240 GSM .Carbon Fabric 3k BD Plain 240 GSM ·Carbon Fabric 3k BD plain 280 GSM ·Carbon Fabric 3k BD Twill 280 GSM ·Carbon Fabric 3k BD Twill 360 GSM ·Carbon Fabric 12k BD Plain 400 GSM ·Carbon Fabric 12k BD Twill 400 GSM Carbon Fabric UD ·Carbon Fabric 3k UD 160 GSM ·Carbon Fabric 12k UD 200 GSM .Carbon Fabric 12k UD 300 GSM ·Carbon Fabric 12k UD 400 GSM ·Carbon Fabric 12k UD 600 GSM

The Quality of this carbon fiber sheet is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 
Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

The Quality of this carbon fiber Agricultural Drone is 100% original.This carbon sheet will be very light weight and will be very strong & smooth. This carbon , fiber sheets are used in drones, Medicals, Robotics etc.
We manufacture Composite Carbon Fiber Sheet As per your requirements also by using Carbon fabric of 3K, 6K, 12K etc. 

Features1.Made of Carbon Fiber Material2.Very Strong & light3.Smooth Finish4.High Tensile strength 5.Excellent Quality

A carbon fiber sheet is a flat panel made from carbon fiber-reinforced polymer. These sheets are widely used in industries like aerospace, automotive, marine, robotics, and sports due to their exceptional strength-to-weight ratio, stiffness, and corrosion resistance.

Key Characteristics:

• Material: Woven carbon fiber fabric (often 3K weave) infused with a resin (typically epoxy).

• Strength & Stiffness: Stronger and stiffer than steel by weight.

• Weight: Very lightweight.

• Appearance: Sleek, often with a glossy or matte finish showcasing the weave pattern.

• Thickness: Ranges from 0.2mm to over 10mm.

• Form Factors: Available in plain weave, twill weave, or unidirectional patterns.

Common Uses:

• Automotive: Interior trim, body panels, spoilers.

• Aerospace: Structural panels, fairings.

• RC & Drones: Frames, arms.

• DIY & Maker Projects: Robotics, brackets, structural parts.

• Sporting Goods: Skis, snowboards, bicycles.

Types:

• Prepreg Sheets: Pre-impregnated with resin and cured under heat and pressure for superior strength.

• Wet Layup Sheets: Resin applied during fabrication, usually cheaper but less consistent in strength.

• Quasi-isotropic Sheets: Fiber orientations optimized for strength in multiple directions.

Buying Tips:

• Check fiber type (e.g., T300, T700).

• Verify cure method (autoclave-cured sheets are premium).

• Look for flatness tolerance if precision is important.

• Choose thickness and weave based on your project's mechanical and aesthetic needs.

 

Would you like recommendations for where to buy it or help choosing the right one for a specific application?

A carbon fiber sheet is a flat panel made from carbon fiber-reinforced polymer. These sheets are widely used in industries like aerospace, automotive, marine, robotics, and sports due to their exceptional strength-to-weight ratio, stiffness, and corrosion resistance.

Key Characteristics:

• Material: Woven carbon fiber fabric (often 3K weave) infused with a resin (typically epoxy).

• Strength & Stiffness: Stronger and stiffer than steel by weight.

• Weight: Very lightweight.

• Appearance: Sleek, often with a glossy or matte finish showcasing the weave pattern.

• Thickness: Ranges from 0.2mm to over 10mm.

• Form Factors: Available in plain weave, twill weave, or unidirectional patterns.

Common Uses:

• Automotive: Interior trim, body panels, spoilers.

• Aerospace: Structural panels, fairings.

• RC & Drones: Frames, arms.

• DIY & Maker Projects: Robotics, brackets, structural parts.

• Sporting Goods: Skis, snowboards, bicycles.

Types:

• Prepreg Sheets: Pre-impregnated with resin and cured under heat and pressure for superior strength.

• Wet Layup Sheets: Resin applied during fabrication, usually cheaper but less consistent in strength.

• Quasi-isotropic Sheets: Fiber orientations optimized for strength in multiple directions.

Buying Tips:

• Check fiber type (e.g., T300, T700).

• Verify cure method (autoclave-cured sheets are premium).

• Look for flatness tolerance if precision is important.

• Choose thickness and weave based on your project's mechanical and aesthetic needs.

 

Would you like recommendations for where to buy it or help choosing the right one for a specific application?

A carbon fiber sheet is a flat panel made from carbon fiber-reinforced polymer. These sheets are widely used in industries like aerospace, automotive, marine, robotics, and sports due to their exceptional strength-to-weight ratio, stiffness, and corrosion resistance.

Key Characteristics:

• Material: Woven carbon fiber fabric (often 3K weave) infused with a resin (typically epoxy).

• Strength & Stiffness: Stronger and stiffer than steel by weight.

• Weight: Very lightweight.

• Appearance: Sleek, often with a glossy or matte finish showcasing the weave pattern.

• Thickness: Ranges from 0.2mm to over 10mm.

• Form Factors: Available in plain weave, twill weave, or unidirectional patterns.

Common Uses:

• Automotive: Interior trim, body panels, spoilers.

• Aerospace: Structural panels, fairings.

• RC & Drones: Frames, arms.

• DIY & Maker Projects: Robotics, brackets, structural parts.

• Sporting Goods: Skis, snowboards, bicycles.

Types:

• Prepreg Sheets: Pre-impregnated with resin and cured under heat and pressure for superior strength.

• Wet Layup Sheets: Resin applied during fabrication, usually cheaper but less consistent in strength.

• Quasi-isotropic Sheets: Fiber orientations optimized for strength in multiple directions.

Buying Tips:

• Check fiber type (e.g., T300, T700).

• Verify cure method (autoclave-cured sheets are premium).

• Look for flatness tolerance if precision is important.

• Choose thickness and weave based on your project's mechanical and aesthetic needs.

 

Would you like recommendations for where to buy it or help choosing the right one for a specific application?

·Carbon Fabric 1K BD Plain 90 GSM ·Carbon Fabric 3k BD Plain 160 GSM ·Carbon Fabric 3k BD Plain 200 GSM ·Carbon Fabric 3k BD Twill 200 GSM ·Carbon Fabric 3k BD Twill 240 GSM .Carbon Fabric 3k BD Plain 240 GSM ·Carbon Fabric 3k BD plain 280 GSM ·Carbon Fabric 3k BD Twill 280 GSM ·Carbon Fabric 3k BD Twill 360 GSM ·Carbon Fabric 12k BD Plain 400 GSM ·Carbon Fabric 12k BD Twill 400 GSM Carbon Fabric UD ·Carbon Fabric 3k UD 160 GSM ·Carbon Fabric 12k UD 200 GSM .Carbon Fabric 12k UD 300 GSM ·Carbon Fabric 12k UD 400 GSM ·Carbon Fabric 12k UD 600 GSM

A carbon fiber sheet is a flat panel made from carbon fiber-reinforced polymer. These sheets are widely used in industries like aerospace, automotive, marine, robotics, and sports due to their exceptional strength-to-weight ratio, stiffness, and corrosion resistance.

Key Characteristics:

• Material: Woven carbon fiber fabric (often 3K weave) infused with a resin (typically epoxy).

• Strength & Stiffness: Stronger and stiffer than steel by weight.

• Weight: Very lightweight.

• Appearance: Sleek, often with a glossy or matte finish showcasing the weave pattern.

• Thickness: Ranges from 0.2mm to over 10mm.

• Form Factors: Available in plain weave, twill weave, or unidirectional patterns.

Common Uses:

• Automotive: Interior trim, body panels, spoilers.

• Aerospace: Structural panels, fairings.

• RC & Drones: Frames, arms.

• DIY & Maker Projects: Robotics, brackets, structural parts.

• Sporting Goods: Skis, snowboards, bicycles.

Types:

• Prepreg Sheets: Pre-impregnated with resin and cured under heat and pressure for superior strength.

• Wet Layup Sheets: Resin applied during fabrication, usually cheaper but less consistent in strength.

• Quasi-isotropic Sheets: Fiber orientations optimized for strength in multiple directions.

Buying Tips:

• Check fiber type (e.g., T300, T700).

• Verify cure method (autoclave-cured sheets are premium).

• Look for flatness tolerance if precision is important.

• Choose thickness and weave based on your project's mechanical and aesthetic needs.

 

Would you like recommendations for where to buy it or help choosing the right one for a specific application?